Verify activity with a true stand alone, wireless, NO MAINS POWER video alarm!
Watch the recording of a burglar caught on video by a movement sensor!!
More videos here
A
security system to deliver police when you need them - through video
verified alarms.
Providing TOTALLY wireless video security anywhere this system delivers the video of what caused the alarm to an alarm receiving centre and to most mobile phones. Police respond to verified crime reports and, with a video record of what caused the alarm, the Police often treat these video verified alarms as a “Crime in Progress” and respond faster than for a routine alarm. Video verification makes law enforcement more efficient and provides greater security to the property owner. (Can extend existing alarms)
Combined movement and video device
The Indoor MotionViewer combines a passive infrared motion sensor, a
0.2 lux digital video camera and infrared illuminators, all integrated
into a single wireless battery powered security device. The entire device
is small, wireless and aesthetically pleasing. The indoor MotionViewer
is These battery powered devices (4 year life) are the heart of the
system. and perfect to secure residential and commercial facilities.
Using the same technology as the indoor MotionViewer™ but enclosed in an IP 65 weatherproof rated case, the Outdoor MotionViewer™ is ideal to secure outdoor assets and remote facilities.
The resolution of the camera is more than enough to determine the nature of activation as the following show:
Control Panel
The control panel is the hub of the system and supervises all peripherals.
It communicates with the central station over the cell network.
Features include:
- Supports up to 24 peripheral devices
- Operates up to 4 years on one set of batteries
- Includes an integrated GPRS cell modem to communicate with the central station
- 915/868/925 MHz communication (AES encrypted) between panel/peripherals
- RF range is up to 2,000 feet (700m)
- Relative Signal Strength Indicator between panel and all peripherals
Methods of Arming/Disarming
The Remote Keypad is completely wireless and self powered for easy installation. It has an easy to read backlit display and comes with a wall/cover tamper switch.
The Proximity Card Arming Station is vandal resistant. It is totally wireless and self-powered so that it can be mounted anywhere without trenching signal or power cables. To arm or disarm, the user simply places their prox card next to the reader to arm/disarm their system.
The Remote Keyfob can arm and disarm the system at distances up to 100 meters. It has an encrypted “rolling code” system that changes the actual signal sent to the panel every time it is used. It features audio feedback (beeping) at arming/disarming to verify communication with the panel and indicate entry/exit delay. The Remote also includes a panic button feature.
The Remote Panic Button enables users to roam their facility and still be able to indicate trouble if needed.
Sirens and Strobe
The Outdoor Siren/Strobe maximizes deterrence by informing intruders of alarm activation and helps keyholders to quickly locate the residence or facility at night. It operates outdoors from -20F to +140F (-33C to +70C). Totally wireless, it can be mounted easily anywhere without the need to drill holes for power and signal cables. Up to four year battery life. Multiple sirens can be placed on the same system.
The Indoor siren enhances deterrence and delivers a 115 db blast in the event of an intrusion to inform occupants of activity. Totally wireless, the siren can be mounted anywhere without the need to drill holes to run signal or power. Multiple sirens can be placed on one system.
Various sensors can be included in the installation and a selection is shown here, please call for more information.
Download a pdf information sheet here
View videos of:
Black
dog on site
Burglary
Cleaning
staff
Copper
theft
Man
taking copper
Attack
of starage container
Corrider activity
